Top fuel flywheel bolt kit
Installation Instructions
Part Number: 200-2804
Application: TOP FUEL (8740) 1/2 DIA.
Flywheel Bolt with Washer- Installation
[1]
Please check the part-number(s) for your application
against the part-number(s) listed on the instruction
sheet.
[2]
Position the chamfered side of the washer on the bolt
so it faces the bolt head. This is done to clear the
radius on the under head of the bolt. Note: Improper
installation of the washer will cause premature bolt
failure.
[3]
Lubricate the threads of the bolt with LOCTITE 242
and the under head of the bolt with ARP ULTRA-
TORQUE FASTENER ASSEMBLY LUBRICANT.
[4]
Install the flywheel onto the crankshaft and tighten the
bolts hand tight.
[5]
Using an alternating or criss cross pattern, torque the
bolts to 125 ft lbs using the specified lubricants
in Step 3.
If you have any questions or need additional information
please contact us at (805) 339-2200 or by FAX at (805)
650-0742
⚠ This is an automatically generated translation and unit conversion. Always refer to the original ARP instruction sheet for exact specifications. Errors may occur. 
