Ford 4.6L V8 cam sprocket bolt kit
Applications
Ford - Modular 4.6L
Installation Instructions
Part Number: 256-1001
Application: FORD 4.6L & 5.4L MODULAR M12
Cam Bolt Installation
[1]
Please check the part-number(s) for your
application against the part-number(s) listed on
the instruction sheet.
[2]
Clean and inspect all hardware prior to
installation. Look for obvious defects or shipping
damages, plus proper fit, length and dimension.
[3]
Lubricate the threads of the bolt and the under
head of the bolt with ARP Ultra-Torque
Fastener Assembly Lubricant.
[4]
Install the camshafts, the camshaft caps and the
timing gears as described in the factory service
manual (if removed).Then install the bolt(s) onto
the camshaft(s) and tighten them hand tight.
[5]
While keeping the camshaft(s) from rotating,
torque the bolts to 90 ft lbs with ARP
Ultra-Torque Fastener Assembly Lubricant.
If you have any questions or need additional
information please contact us at (805) 339-2200 or
by FAX at (805) 650-0742
⚠ This is an automatically generated translation and unit conversion. Always refer to the original ARP instruction sheet for exact specifications. Errors may occur. 
