Brake disc for Porsche 911 996 997 Boxster and Cayman 340mm

Side

809,19
Price excluding VAT: 668,75
Our stock:
0 Items
Item No.:
A1-031SL

Brake disc for Porsche 911 996 997 Boxster and Cayman 340mm

Price per single drive

340mm drives

replaces oem part number:

PORSCHE 996 351 405 00
PORSCHE 996 351 405 01
PORSCHE 996 351 405 02

Brake disc for the Porsche 911 (996 and 997), Cayman and Boxster. Concerns 1 2-part floating brake disc of very high quality. Girodisc is a company that focuses on perfecting brake discs for standard braking applications using standard calipers.

The Girodisc system is a direct replacement for the OE disc with the addition of our included caliper spacers and longer bolts. This rotor is slightly larger than the OEM rotor at 340mm versus 317mm for greater stopping power and cooling capacity. The standard Porsche brake discs are single-piece and therefore more sensitive to heat development and warping. In addition, the gyro disk is relatively lighter.

The central part of our rotor is made of strict American 6061-T6 aircraft specifications aluminum. The disc is made from our own cast iron, cast in the USA and machined from start to finish in-house at Girodisc. The rotor uses a curved vane design developed during racing to act like a centrifugal pump to force cooling air through the disc.

The rotor and hat have a floating mounting system, which uses 10 high-strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and plated with cadmium for long-term corrosion resistance. These pins take the load from braking operations while maintaining axial and radial float between the cap and disc. The pins are secured with class 12.9 screws with hardened washers. To prevent the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side that allow the rotor to grow with heat expansion, but eliminate the chatter and noise of floating rotors. This float also allows the rotor to center itself between the brake pads.

Concerns 1 brake disc, good for 1 can of 1 axle. For a complete axle, order 2x. 

This set of 1 brake disc contains the rotor, an aluminum flange adapter and the correct mounting material from the adapter to the rotor. 

If these discs need to be replaced, then only the rotor needs to be replaced, this part costs considerably less than this set.

At no stock usually available within the week. To be sure, please contact us.

🔧 OEM Part Number Information

Brand: GiroDisc

Accepted OEM number: 99635140501 HIGH

OEM Suggestions:

  • 99635140501 — Porsche — Remschijf vooras links, geventileerd, 318mm diameter
  • 99635140601 — Porsche — Remschijf vooras rechts, geventileerd, 318mm diameter

🚗 Compatible vehicles:
Porsche 996 Carrera (3.4L, 3.6L), Porsche 997.1 Carrera (3.6L), Porsche 986 Boxster S (3.2L), Porsche 987.1 Boxster S (3.2L, 3.4L), Porsche 987.1 Cayman S (3.4L), Porsche 987.2 Boxster (2.9L, 3.4S), Porsche 987.2 Cayman (2.9L, 3.4R, 3.4S)

De GiroDisc A1-031 is een 340mm remschijf upgrade die de originele 317mm (of 318mm) OEM remschijven vervangt voor de genoemde Porsche modellen. De OEM onderdeelnummers 99635140501 (links) en 99635140601 (rechts) worden consistent vermeld als 318mm geventileerde voorremschijven voor de Porsche 996 Carrera, 997.1 Carrera, 986 Boxster S en 987 Boxster S/Cayman S modellen. De kleine afwijking tussen 317mm en 318mm is waarschijnlijk te wijten aan afronding of meetverschillen, en deze nummers komen overeen met de originele onderdelen die door het aftermarket product worden vervangen.

⚠️ OEM match automatically generated by AI with HIGH confidence. Always verify the OEM number matches your specific vehicle.

Brake disc for Porsche 911 996 997 Boxster and Cayman 340mm does not have any reviews yet. Share your experiences and post a review.
Brake disc for Porsche 911 996 997 Boxster and Cayman 340mm

Meest recente reviews

Alternate products for Brake disc for Porsche 911 996 997 Boxster and Cayman 340mm