Honda D-Series 1.5L & 1.6L SOHC flywheel bolt kit
Applications
Honda 1.5L
Honda 1.6L
Honda D-series
Installation Instructions
Part Number: 208-2801
Application: HONDA SOHC (D SERIES) 4-CYL
Flywheel Bolt without Washer- Installation
[1]
Please check the part-number(s) for your application
against the part-number(s) listed on the instruction
sheet.
[2]
DO NOT USE ANY WASHERS with ARP Flywheel
Bolts. They are designed to be installed without
them. Note: ARP will NOT be responsible for any
failures resulting from using a washer with this kit.
[3]
Make sure there is an adequate chamfer around the
bolt holes on the flywheel to clear the radius under
the head of the bolt.
[4]
Lubricate the threads of the bolt with LOCTITE 242
and the under head of the bolt with ARP ULTRA-
TORQUE FASTENER ASSEMBLY LUBRICANT.
Then install the flywheel onto the crankshaft and
tighten the bolts hand tight.
[5]
Using an alternating or criss cross pattern, torque the
bolts to 95 ft lbs using the specified lubricants
in Step 4.
If you have any questions or need additional information
please contact us at (805) 339-2200 or by FAX at (805)
650-0742
⚠ This is an automatically generated translation and unit conversion. Always refer to the original ARP instruction sheet for exact specifications. Errors may occur. 
