Description
The Plug&Play kit for cooling the brakes of the Megane 3 RS. Easy to cool, quick to install and without tools.
In order to cool a brake effectively, it is necessary to get as much air as possible to it. The brake disc must be supplied with air as centrally as possible. A classic solution using an anchor plate means that you have to lay a hose, which doesn't have much space on this special front axle. However, in order to use the turbine effect of the brake disc, we have developed a brake cooling system that is mounted on the axle frame and flows to the center of the disc regardless of the wheel position. It is easily attached using existing locking pins and without any permanent changes to the vehicle.
Despite the optimal flow, the part does not represent the lowest point of the vehicle.
If you are interested, take a closer look Video about the development of the product on:
Included in delivery:
1x air duct outlet on the left
1x air duct outlet on the right
4x cable ties for fastening
This item is suitable for
Renault Megane 3 RS
Motorsport parts without street approval We explicitly point out that none of our products offered for sale are original vehicle parts the vehicle manufacturer BMW AG, M GmbH, MINI, VAG or other vehicle manufacturers. Naming the vehicle brands and models only serves to find the product and assign it to the appropriate vehicle type.
The different models vary slightly in the wheel position, coupled with different chassis geometries and wheel and tire combinations, it becomes impossible for us to cover all variants. In the worst case, the wheel could rest slightly at full steering angle (which should only be the case when parking), which could not cause any damage to the tire. In this case we were asked to forego the last ? of the steering turns.